added arduino, modified build

2020-02-02 15:28:36 -08:00
parent 0189d519c6
commit 6480bc593f
3583 changed files with 1305025 additions and 247 deletions
--- a/arduino/libraries/Firmata/FirmataDefines.h
+++ b/arduino/libraries/Firmata/FirmataDefines.h
@@ -0,0 +1,283 @@
+/*
+  FirmataDefines.h
+  Copyright (c) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
+  Copyright (C) 2009-2016 Jeff Hoefs.  All rights reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  See file LICENSE.txt for further informations on licensing terms.
+*/
+
+#ifndef FirmataDefines_h
+#define FirmataDefines_h
+
+#include "FirmataConstants.h"
+
+/* Version numbers for the Firmata library.
+ * The firmware version will not always equal the protocol version going forward.
+ * Query using the REPORT_FIRMWARE message.
+ */
+#define FIRMATA_FIRMWARE_MAJOR_VERSION  firmata::FIRMWARE_MAJOR_VERSION
+#define FIRMATA_FIRMWARE_MINOR_VERSION  firmata::FIRMWARE_MINOR_VERSION
+#define FIRMATA_FIRMWARE_BUGFIX_VERSION firmata::FIRMWARE_BUGFIX_VERSION
+
+/* Version numbers for the protocol.  The protocol is still changing, so these
+ * version numbers are important.
+ * Query using the REPORT_VERSION message.
+ */
+#define FIRMATA_PROTOCOL_MAJOR_VERSION  firmata::PROTOCOL_MAJOR_VERSION // for non-compatible changes
+#define FIRMATA_PROTOCOL_MINOR_VERSION  firmata::PROTOCOL_MINOR_VERSION // for backwards compatible changes
+#define FIRMATA_PROTOCOL_BUGFIX_VERSION firmata::PROTOCOL_BUGFIX_VERSION // for bugfix releases
+
+#ifdef MAX_DATA_BYTES
+#undef MAX_DATA_BYTES
+#endif
+#define MAX_DATA_BYTES          firmata::MAX_DATA_BYTES // max number of data bytes in incoming messages
+
+// message command bytes (128-255/0x80-0xFF)
+
+#ifdef DIGITAL_MESSAGE
+#undef DIGITAL_MESSAGE
+#endif
+#define DIGITAL_MESSAGE         firmata::DIGITAL_MESSAGE // send data for a digital port (collection of 8 pins)
+
+#ifdef ANALOG_MESSAGE
+#undef ANALOG_MESSAGE
+#endif
+#define ANALOG_MESSAGE          firmata::ANALOG_MESSAGE // send data for an analog pin (or PWM)
+
+#ifdef REPORT_ANALOG
+#undef REPORT_ANALOG
+#endif
+#define REPORT_ANALOG           firmata::REPORT_ANALOG // enable analog input by pin #
+
+#ifdef REPORT_DIGITAL
+#undef REPORT_DIGITAL
+#endif
+#define REPORT_DIGITAL          firmata::REPORT_DIGITAL // enable digital input by port pair
+
+//
+
+#ifdef SET_PIN_MODE
+#undef SET_PIN_MODE
+#endif
+#define SET_PIN_MODE            firmata::SET_PIN_MODE // set a pin to INPUT/OUTPUT/PWM/etc
+
+#ifdef SET_DIGITAL_PIN_VALUE
+#undef SET_DIGITAL_PIN_VALUE
+#endif
+#define SET_DIGITAL_PIN_VALUE   firmata::SET_DIGITAL_PIN_VALUE // set value of an individual digital pin
+
+//
+
+#ifdef REPORT_VERSION
+#undef REPORT_VERSION
+#endif
+#define REPORT_VERSION          firmata::REPORT_VERSION // report protocol version
+
+#ifdef SYSTEM_RESET
+#undef SYSTEM_RESET
+#endif
+#define SYSTEM_RESET            firmata::SYSTEM_RESET // reset from MIDI
+
+//
+
+#ifdef START_SYSEX
+#undef START_SYSEX
+#endif
+#define START_SYSEX             firmata::START_SYSEX // start a MIDI Sysex message
+
+#ifdef END_SYSEX
+#undef END_SYSEX
+#endif
+#define END_SYSEX               firmata::END_SYSEX // end a MIDI Sysex message
+
+// extended command set using sysex (0-127/0x00-0x7F)
+/* 0x00-0x0F reserved for user-defined commands */
+
+#ifdef SERIAL_MESSAGE
+#undef SERIAL_MESSAGE
+#endif
+#define SERIAL_MESSAGE          firmata::SERIAL_DATA // communicate with serial devices, including other boards
+
+#ifdef ENCODER_DATA
+#undef ENCODER_DATA
+#endif
+#define ENCODER_DATA            firmata::ENCODER_DATA // reply with encoders current positions
+
+#ifdef SERVO_CONFIG
+#undef SERVO_CONFIG
+#endif
+#define SERVO_CONFIG            firmata::SERVO_CONFIG // set max angle, minPulse, maxPulse, freq
+
+#ifdef STRING_DATA
+#undef STRING_DATA
+#endif
+#define STRING_DATA             firmata::STRING_DATA // a string message with 14-bits per char
+
+#ifdef STEPPER_DATA
+#undef STEPPER_DATA
+#endif
+#define STEPPER_DATA            firmata::STEPPER_DATA // control a stepper motor
+
+#ifdef ONEWIRE_DATA
+#undef ONEWIRE_DATA
+#endif
+#define ONEWIRE_DATA            firmata::ONEWIRE_DATA // send an OneWire read/write/reset/select/skip/search request
+
+#ifdef SHIFT_DATA
+#undef SHIFT_DATA
+#endif
+#define SHIFT_DATA              firmata::SHIFT_DATA // a bitstream to/from a shift register
+
+#ifdef I2C_REQUEST
+#undef I2C_REQUEST
+#endif
+#define I2C_REQUEST             firmata::I2C_REQUEST // send an I2C read/write request
+
+#ifdef I2C_REPLY
+#undef I2C_REPLY
+#endif
+#define I2C_REPLY               firmata::I2C_REPLY // a reply to an I2C read request
+
+#ifdef I2C_CONFIG
+#undef I2C_CONFIG
+#endif
+#define I2C_CONFIG              firmata::I2C_CONFIG // config I2C settings such as delay times and power pins
+
+#ifdef REPORT_FIRMWARE
+#undef REPORT_FIRMWARE
+#endif
+#define REPORT_FIRMWARE         firmata::REPORT_FIRMWARE // report name and version of the firmware
+
+#ifdef EXTENDED_ANALOG
+#undef EXTENDED_ANALOG
+#endif
+#define EXTENDED_ANALOG         firmata::EXTENDED_ANALOG // analog write (PWM, Servo, etc) to any pin
+
+#ifdef PIN_STATE_QUERY
+#undef PIN_STATE_QUERY
+#endif
+#define PIN_STATE_QUERY         firmata::PIN_STATE_QUERY // ask for a pin's current mode and value
+
+#ifdef PIN_STATE_RESPONSE
+#undef PIN_STATE_RESPONSE
+#endif
+#define PIN_STATE_RESPONSE      firmata::PIN_STATE_RESPONSE // reply with pin's current mode and value
+
+#ifdef CAPABILITY_QUERY
+#undef CAPABILITY_QUERY
+#endif
+#define CAPABILITY_QUERY        firmata::CAPABILITY_QUERY // ask for supported modes and resolution of all pins
+
+#ifdef CAPABILITY_RESPONSE
+#undef CAPABILITY_RESPONSE
+#endif
+#define CAPABILITY_RESPONSE     firmata::CAPABILITY_RESPONSE // reply with supported modes and resolution
+
+#ifdef ANALOG_MAPPING_QUERY
+#undef ANALOG_MAPPING_QUERY
+#endif
+#define ANALOG_MAPPING_QUERY    firmata::ANALOG_MAPPING_QUERY // ask for mapping of analog to pin numbers
+
+#ifdef ANALOG_MAPPING_RESPONSE
+#undef ANALOG_MAPPING_RESPONSE
+#endif
+#define ANALOG_MAPPING_RESPONSE firmata::ANALOG_MAPPING_RESPONSE // reply with mapping info
+
+#ifdef SAMPLING_INTERVAL
+#undef SAMPLING_INTERVAL
+#endif
+#define SAMPLING_INTERVAL       firmata::SAMPLING_INTERVAL // set the poll rate of the main loop
+
+#ifdef SCHEDULER_DATA
+#undef SCHEDULER_DATA
+#endif
+#define SCHEDULER_DATA          firmata::SCHEDULER_DATA // send a createtask/deletetask/addtotask/schedule/querytasks/querytask request to the scheduler
+
+#ifdef SYSEX_NON_REALTIME
+#undef SYSEX_NON_REALTIME
+#endif
+#define SYSEX_NON_REALTIME      firmata::SYSEX_NON_REALTIME // MIDI Reserved for non-realtime messages
+
+#ifdef SYSEX_REALTIME
+#undef SYSEX_REALTIME
+#endif
+#define SYSEX_REALTIME          firmata::SYSEX_REALTIME // MIDI Reserved for realtime messages
+
+// pin modes
+
+#ifdef PIN_MODE_INPUT
+#undef PIN_MODE_INPUT
+#endif
+#define PIN_MODE_INPUT          firmata::PIN_MODE_INPUT // same as INPUT defined in Arduino.h
+
+#ifdef PIN_MODE_OUTPUT
+#undef PIN_MODE_OUTPUT
+#endif
+#define PIN_MODE_OUTPUT         firmata::PIN_MODE_OUTPUT // same as OUTPUT defined in Arduino.h
+
+#ifdef PIN_MODE_ANALOG
+#undef PIN_MODE_ANALOG
+#endif
+#define PIN_MODE_ANALOG         firmata::PIN_MODE_ANALOG // analog pin in analogInput mode
+
+#ifdef PIN_MODE_PWM
+#undef PIN_MODE_PWM
+#endif
+#define PIN_MODE_PWM            firmata::PIN_MODE_PWM // digital pin in PWM output mode
+
+#ifdef PIN_MODE_SERVO
+#undef PIN_MODE_SERVO
+#endif
+#define PIN_MODE_SERVO          firmata::PIN_MODE_SERVO // digital pin in Servo output mode
+
+#ifdef PIN_MODE_SHIFT
+#undef PIN_MODE_SHIFT
+#endif
+#define PIN_MODE_SHIFT          firmata::PIN_MODE_SHIFT // shiftIn/shiftOut mode
+
+#ifdef PIN_MODE_I2C
+#undef PIN_MODE_I2C
+#endif
+#define PIN_MODE_I2C            firmata::PIN_MODE_I2C // pin included in I2C setup
+
+#ifdef PIN_MODE_ONEWIRE
+#undef PIN_MODE_ONEWIRE
+#endif
+#define PIN_MODE_ONEWIRE        firmata::PIN_MODE_ONEWIRE // pin configured for 1-wire
+
+#ifdef PIN_MODE_STEPPER
+#undef PIN_MODE_STEPPER
+#endif
+#define PIN_MODE_STEPPER        firmata::PIN_MODE_STEPPER // pin configured for stepper motor
+
+#ifdef PIN_MODE_ENCODER
+#undef PIN_MODE_ENCODER
+#endif
+#define PIN_MODE_ENCODER        firmata::PIN_MODE_ENCODER // pin configured for rotary encoders
+
+#ifdef PIN_MODE_SERIAL
+#undef PIN_MODE_SERIAL
+#endif
+#define PIN_MODE_SERIAL         firmata::PIN_MODE_SERIAL // pin configured for serial communication
+
+#ifdef PIN_MODE_PULLUP
+#undef PIN_MODE_PULLUP
+#endif
+#define PIN_MODE_PULLUP         firmata::PIN_MODE_PULLUP // enable internal pull-up resistor for pin
+
+#ifdef PIN_MODE_IGNORE
+#undef PIN_MODE_IGNORE
+#endif
+#define PIN_MODE_IGNORE         firmata::PIN_MODE_IGNORE // pin configured to be ignored by digitalWrite and capabilityResponse
+
+#ifdef TOTAL_PIN_MODES
+#undef TOTAL_PIN_MODES
+#endif
+#define TOTAL_PIN_MODES         firmata::TOTAL_PIN_MODES
+
+#endif // FirmataConstants_h